| 1. Once the veneer has been glued on the surface it has to be finely flattened before staining. Then varnish is applied for polishing. High gloss surfaces need special care. |
2. Polyester is applied in several layers. It has then to be smoothed with 6 different grains of sandpaper before polishing. This is done by buffing with cloth wheels which are pressed against the surface. It is a long process to bring out the high gloss by burnishing with fine waxes. |
3. It is left to highly experienced polishers to produce the fine gloss. Any small mark could blemish the finish. |
